WUKO BENDER MIX AND MATCH

PICK TWO OR MORE BENDERS AND RECEIVE A FITTING WUKO CARRY CASE AND A FREE RULER

Just add the first bender you want to your shopping cart, continue shopping and add the second bender; complete your check-out and we'll add the goodies to your order.  Easy!

2020 Mini Bender:

Our curve specialist! For bending up to 90º, especially on small inner and outer radii. 

2204 and 2204-1 Uni Bender:

Uni like universal! For bending and forming sheet metal fabrication. Suitable for both straight and curved sheets. Equipped with four roller stops enabling easier handling and better guidance, especially on outside radii. Includes a screw-on handle for easier working at maximum bending height. Bending height: 6-200 mm

• Uni Bender 2204:             Max. sheet metal thickness of 0.8 mm. Weight: 1.49 kg
• Uni Bender 2204-1mm   Max. sheet metal thickness of 1 mm. Weight: 1.5 kg

6050 Mini Uber Bender:

Equipped with an angled bending disc for clean bending up to 100°. The protection of delicate materials. Spring back materials. Bending along longitudinal beadings. Bending height: 5 - 50 mm. Max. sheet metal thickness of 0.8 mm. Weight: 0.91 kg

6200 Uber Bender:

Equipped with an angled bending disc for bending up to 100°. The protection of delicate materials. Spring back materials. Bending along longitudinal beadings. Bending height: 6 - 200 mm. Max. sheet metal thickness of 0.8 mm. Weight: 1.53 kg

9050 Bogie Bender:

The Curve Hugger!  This bogie bender is for inside & outside curves, as well as straight bends. The tool's two swivel joints with three roller stops each can be fixed with two integrated locking pins in seconds. Bending height: 5 - 50 mm. Max. sheet metal thickness of 0.8 mm. Weight: 1.2 kg

4000 Disc-O-Bender:

For bending sheet metal legs from 90° up to 180° (hem). Bending height: 8 - 40 mm. Max. sheet metal thickness of 0.8 mm. Weight: 2.7 kg

4050 Micro Disc-O-Bender

For bending sheet metal from 90° up to 180°. Bending height: 5 - 12 mm. Max. sheet metal thickness of 0.8 mm. Weight: 680 g.

4040 and 4041 Disc-O-Bender:

Starts where the others stop! For bending sheet metal legs from 90° up to 180°. No free space is required at the side for setting the tool on and off. Place the tool on the correct angle, twist the roller stop back, and start bending. Max. sheet metal thickness of 0.8 mm.

• TWIST 4040:             Bending height: 8 - 32 mm. Weight: 0.76 kg
• MAXI TWIST 4041:  Bending height: 8 - 40 mm. Weight: 0.8 kg

3202 and 3352 Duo Bender: 

The WUKO Duo Bender was specially designed for the quick and easy bending of long, straight sheet metal strips. Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle. For bending up to 90°.

Standard Models: max. sheet metal thickness 0.8 mm