SUPERCRAFT DEAD BLOW SOFT FACED *INSERTS*

Hover for zoomClick to enlarge

SUPERCRAFT DEAD BLOW SOFT FACED *INSERTS*Insert for Dead Blow HammerHANDLESUPERCRAFT DEAD BLOW SOFT FACED HAMMER *INSERTS*Insert fort Drop MalletInserts for Punches

HALDER SUPERCRAFT INSERTS AND HANDLE

Watch video

Replacements For Supercraft Hammer, Mallets or Drop Mallets

INSERTS OR HANDLE

SIZE

Price

From $4.00 NZD ex GST

Description

INSERTS FOR SUPERCRAFT DEAD BLOW SOFT FACED DROP MALLETS, PUNCHES AND HAMMER

The nylon inserts for SUPERCRAFT soft-face mallets (series 3508) with their hardness of approx. 73 Shore are very hard. This white polyamide inserts offer outstanding impact qualities and are guaranteed to combine maximum strength with unique durability. They consist of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, they are therefore considerably more wear-resistant and durable and will never chip even in sub-zero temperatures. They stand up to the high impact forces produced by non-rebound soft-face mallets. What is more, they are oil and grease resistant and are also used on SUPERCRAFT sledge hammers, punches and drop-mallets.

  • Nylon, white
  • Hard
  • Very wear-resistant
  • No chipping (even at temperatures below zero)
  • Noise-dampening
  • Very high impact

Diameter:

  • 3508.01    ø: 10 mm  for Punches (3408)
  • 3508.012   ø: 12 mm for Punches (3408)
  • 3508.015   ø: 15 mm for Punches (3408)
  • 3508.02     ø: 20 mm for Drop Mallet (3408) and Hammer (3366)
  • 3508.025    ø: 25 mm for Drop Mallet (3408) and Hammer (3366)
  • 3508.03      ø: 30 mm for Drop Mallet (3408) and Hammer (3366)    
  • 3508.035    ø: 35 mm for Drop Mallet (3408) and Hammer (3366)
  • 3508.04      ø: 40 mm for Drop Mallet (3408) and Hammer (3366)
  • 3508.045    ø: 45 mm for Drop Mallet (3408) and Hammer (3366)
  • 3508.05      ø: 50 mm for Drop Mallet (3408) and Hammer (3366)
  • 3508.08      ø: 80 mm for Hammer (3366)
  • 3508.1        ø: 100 mm for Hammer (3366)

HANDLE FOR SUPERCRAFT DEAD BLOW HAMMER

Made of hickory wood, the SUPERCRAFT wooden handles of the series 3566 are ergonomic and varnished. Hickory is a type of wood with an extra long fibre structure, which contributes to the great stability of the handle. This structure also keeps the handles from ever breaking in two completely and ensures that both pieces remain connected. This prevents injuries caused by hammer heads that have come off. These handles are available as replacement handles for the SUPERCRAFT soft-face mallets and SUPERCRAFT sledge hammers with a length of up to 900mm. This translates to savings in both money and resources.

  • High-quality hickory handles for SUPERCRAFT soft-face mallets and SUPERCRAFT sledge hammers.
  • Shaped ergonomically
  • Varnished
  • Long-fibre, ultra durable
  • Safety-relevant (will not break in two)

Handle sizes:

  • 3566.03    For hammer  ø: 30-35 mm
  • 3566.04    For hammer ø: 40-45 mm
  • 3566.081   For hammer ø: 80 / 800 mm / 4kg
  • 3566.1       For hammer ø: 100 / 900 mm / 7 & 10 kg

Links:

MADE IN GERMANY